CompuLab IPC2 Spécifications télécharger pdf (Page 57)

CompuLab Ltd. IPC2 – Hardware Specification Page 57 of 83

5.2.3.1 DisplayPort Connector

Table 31 shows the pin assignments of the DisplayPort external connector on a downstream port

on a Source device (IPC2) and Table 32 show the pin assignments of the DisplayPort external

connector on an upstream port on a Sink device (DisplayPort Monitor).

Table 31 – Downstream Port DP Connector Pinout

Notes:

1. Pins 13 and 14 must be connected to ground through a pull-down device. External devices

and cable assemblies must be designed to not rely on a low impedance ground path from

these pins.

2. Pin 20, PWR Out, must provide +3.3V+/-10% with a maximum current of 500mA and a

minimum power capability of 1.5 watts.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 82 83

Pas de commentaire

CompuLab IPC2 Spécifications Page 57